3.5inch Touchscreen Shield

Fully assembled 3.5inch display with 480×320 pixels TFT LCD and a resistive touch overlay. Just plug it on top of ODROID-C4/C2/C1+/C0.
ODROID-XU4 needs the Shifter-Shield board to use this display.

You will need an official Ubuntu image to configure it.
You can simply download the Kernel updates (via dist-upgrade) and configure your ODROID for this display shield.

Please follow the step by step guide from the WiKi. If not, the display doesn’t work.

https://wiki.odroid.com/accessory/display/3.5inch_lcd_shield/3.5inch_lcd_shield

Note: this display is NOT compatible with Android platform.

 

BOARD DETAIL

 

You can place the RTC Shield on the bottom side of the LCD Shield PCB. The RTC Shield must be purchased separately.

 

Specification

LCD Type	TFT
LCD Interface	Parallel 8-bit
Touch Screen	Resistive
Touch Screen Controller	SX865X (I2C)
LCD Active Area	48.96(H) x 73.44(V)mm
Backlight	LED
Resolution	480 x 320 pixels
LCD Controller	ILI9488
Board Size	56(H) x 95(V) x 17(T)mm
Weight	54g

* Limitations
– GPU/VPU Hardware acceleration required OpenGL-ES and Video playback are not supported.
– The frame rate is around 10~15FPS due to slow GPIO toggling speed.

 

Special Case for the Shield

 

 

 

Compatible with ODROID-C0, ODROID-C1+, ODROID-C2, ODROID-C4, ODROID-N2, ODROID-N2+, ODROID-XU4, ODROID-XU4Q