(DISCONTINUED)ODROID-C1+

Name: (DISCONTINUED)ODROID-C1+
SKU: G143703355573
Price: 40300 KRW
Availability: OutOfStock

₩40,300

OBSOLETED

This product is no longer available.

For Bank transfer

Tier	Discount rate
25 ~ 99	3%
100 ~ 299	4%
300 ~ 499	5%
500 ~ 999	6%
1000 ~ and more	7%

품절

Wishlist

SKU: G143703355573 카테고리: Obsolete Products

설명

All prepared boards were completely sold out. This product is no longer available.

Discontinuation Notice

~~We would like to inform you that ODROID-C1+ will be discontinued due to the CPU (Amlogic’s S805) supplying discontinuation.~~

However, we will prepare stocks around 10K over the coming months in order to allow for future planning by all of our customers. So, We expect that it will be last for 6~7 months but, possibly sold out fast.
~~While we regret any inconvenience this announcement may cause, we are eager to supply your future product requirement with our new products such as ODROID-C4, ODORID-N2+.~~

~~We appreciate your cooperation and understanding.~~

ODROID-C1+

The ODROID-C1+ is esteemed to be the most powerful low-cost single board computer available, as well as being an extremely versatile device. Featuring a quad-core Amlogic processor, advanced Mali GPU, and Gigabit Ethernet, it can function as a home theater set-top box, a general purpose computer for web browsing, gaming and socializing, a compact tool for college or office work, a prototyping device for hardware tinkering, a controller for home automation, a workstation for software development, and much more.

Some of the modern operating systems that run on the ODROID-C1+ are Ubuntu, Android, Fedora, Arch Linux, Debian, and LibreELEC, with thousands of free open-source software packages available. The ODROID-C1+ is an ARM device — the most widely used architecture for mobile devices and embedded 32-bit computing. The ARM processor’s small size, reduced complexity and low power consumption makes it very suitable for miniaturized devices such as wearables and embedded controllers.

* Amlogic ARM® Cortex®-A5(ARMv7) 1.5Ghz quad core CPUs
* Mali™-450 MP2 GPU (OpenGL ES 2.0/1.1 enabled for Linux and Android)
* 1Gbyte DDR3 SDRAM
* Gigabit Ethernet
* 40pin GPIOs + 7pin I2S
* eMMC4.5 HS200 Flash Storage slot / UHS-1 SDR50 MicroSD Card slot
* USB 2.0 Host x 4, USB OTG x 1 (power + data capable)
* Infrared(IR) Receiver
* Ubuntu or Android OS

Because of the above changes, the original cases and heat sinks are not compatible.

OS Image files and BSP source code are available in our WiKi : https://wiki.odroid.com/odroid-c1/odroid-c1

Full User Manual : http://magazine.odroid.com/category/manuals/

* An additional MicroSD card or an eMMC module is required to install the OS. We recommend the eMMC module as it has much higher performance than standard MicroSD cards.

* Remove the Jumper on J8, if you don’t use the USB OTG port as a power input.
It will reduce the power consumption and heat significantly.

INTRODUCTION

Hardware Specification

OpenGL ES and XBMC on Ubuntu

OpenGL ES2.0 with myAHRS+ on Ubuntu

C Tinkering Kit

16×2 LCD+IO Shield

Make Android Game Station

STORY ABOUT THE ODROID-C1

We had received tons of requests for the following model of ODROID-W. So, we started survey for components for ODROID-W2. Finding out the right CPU was the key of this project. Our original target was similar cost and similar performance as ODROID-W. But we realised that we cannot make ODROID-W2 once we reached to Amlogic S805 quad core processor. The performance of Amlogic S805 1.5Ghz quad core processor is outperforming Broadcom BCM2835.
We launched the ODROID-C1 in December 2014 and RPi2 was released in February 2015.
The ODROID-C1 was superseded by the ODROID-C1+ in August 2015.

Here is the comparisons to give you better understanding of ODROID-C1.

ODROID-C1+ vs Raspberry Pi2

Both are Linux-friendly, $35 ARM® single-board computers for various applications and purposes.

Hardware Comparison

The ODROID-C1+ has many advantages over the Raspberry Pi. The processor is an S805 1.5GHz Quad-core from Amlogic with 1GByte DDR3 RAM, Gigabit Ethernet and IR-receiver. The size of this computer is still only 85 x 56 mm with a weight of 40g, and offers silent operation, 2~3W average power usage, and instant portability, since it fits in a shirt pocket.

One powerful feature of the ODROID-C1+ is the row of GPIO (general purpose input/output) pins along the edge of the device. These pins are a physical interface between the board and the outside world. The 40pin interface header includes SPI, I2C, UART, ADC and GPIO function.

An SD 3.01 standard compatible UHS-1 Micro-SD card, as well as the faster eMMC module, can be ordered with the ODROID-C1+, and arrives with the popular Ubuntu operating system already installed. Insert the SD card into the slot, connect a monitor, a keyboard, a mouse, Ethernet and power cable, and that’s all you need to do to use the ODROID-C1+! Browse the web, play games, run office programs, edit photos, develop software, and watch videos right away.

The RTC, IR receiver and ADC features on the ODROID-C1+ offer many options for building great DIY projects

	ODROID-C1+	RPi 2 Model B
CPU	Amlogic S805 SoC 4 x ARM® Cortex®-A5 1.5GHz ARMv7 Architecture @28nm	Broadcom BCM2836 4 x ARM® Cortex®-A7 900Mhz ARMv7 Architecture @40nm
GPU	2 x ARM® Mali™-450MP 600MHz	1 x VideoCore IV 250MHz
RAM	1GB 32bit DDR3 792MHz	1GB 32bit LP-DDR2 400MHz
Flash Storage	Micro-SD UHS-1@100Mhz/SDR50 or eMMC storage option	Micro-SD @50Mhz/SDR25, No eMMC storage option
USB2.0 Host	4 Ports	4 Ports
USB2.0 Device / OTG	1 Port for Linux USB Gadget driver	No
Ethernet/LAN	10/100/1000 Mbit/s	10/100 Mbit/s
Video Output	HDMI	HDMI / Composite RCA
Audio Output	HDMI	HDMI / 3.5mm Jack
Camera Input	USB 720p	MIPI CSI 1080p
Real Time Clock	YES (On-board RTC)	No(unless using an add-on module)
IR Receiver	YES (On-board IR Sensor)	No(unless using an add-on module)
IO Expansion	40pin port (GPIO/UART/SPI/I2C/ADC) 7pin port (I2S) : ODROID-C1+ only	40pin port (GPIO/UART/SPI/I2C/I2S)
ADC	10bit SAR 2 channels	No(unless using an add-on board)
Size	85 x 56mm (3.35” x 2.2”)	85 x 56mm (3.35” x 2.2”)
Weight	40g (1.41 oz)	42g (1.48 oz)
Price	$35	$35

Computing performance comparison
We ran a simple, popular benchmark called UnixBench, NBench and mbw100 to compare the performance of the popular boards. Tests were done using several manufacturer-provided images based on a clean install, and the “apt-get update && apt-get upgrade” commands were first run to ensure that both boards was up-to-date.

Benchmarks (Index Score)	Raspberry Pi 3	ODROID-C1+	ODROID-C2	ODROID-XU4
Unixbench: Dhrystone-2	865.4	1571.6	2768.2	5941.4
Unixbench: Double-Precision Whetstone (x3)	1113	1887.3	3076.8	6186.3
Nbench 2.2.3: Integer (x40)	619.92	1173.6	1808.92	2430.52
Nbench 2.2.3: Floating-Point (x100)	781.8	1245.3	2300.3	3787.3
mbw100: Memory Bandwidth (MiB/s)	542.912	616.339	1472.856	2591.461

Storage I/O comparison

To obtain the results in the storage I/O comparison graph, type the following lines at a command prompt. The first command tests the write speed, and the second command tests the read speed:

$ dd if=/dev/zero of=test.tmp oflag=direct bs=500K count=1024

$ dd if=test.tmp of=/dev/null iflag=direct bs=500K count=1024

Media access performance	RPi2 Model B	ODROID-C1+
eMMC Read (MB/s)	NA	62.2
eMMC Write (MB/s)	NA	25.1
MicroSD UHS-1 Read (MB/s)	19.2	32.5
MicroSD UHS-1 Write (MB/s)	13.1	14.2

If you use the eMMC storage, you can get about two to three times faster storage I/O read performance. However, an affordable microSD UHS-1 card can still achieve reasonably fast speeds thanks to the advanced SD 3.01 host controller in the S805 processor. The MicroSD card read performance on C1+ is still about 1.7 times faster then RPi if you use the UHS-1 memory card.

Ethernet IO comparison

To replicate the results in the Ethernet comparison graph, type the following lines at a command prompt:
Server agent on the C1+ and Client agent on the host PC
ruppi@ruppi-desktop:~$ iperf -s 192.168.2.10 -P 10
[SUM] 0.0-10.1 sec 1.10 GBytes 928 Mbits/sec

Server agent on the host PC and Client agent on the C1+
odroid@odroid:~# iperf -c 192.168.2.2 -P 10
[SUM] 0.0-10.0 sec 467 MBytes 392 Mbits/sec

Server agent on the RPi and Client agent on the host PC
ruppi@ruppi-desktop:~$ iperf -c 192.168.2.11 -P 10
[SUM] 0.0-10.3 sec 121 MBytes 98.6 Mbits/sec

Server agent on the host PC and Client agent on the RPi
pi@raspberrypi:~$ iperf -s 192.168.2.2 -P 10
[SUM] 0.0-10.3 sec 81.6 MBytes 66.6 Mbits/sec

Thanks to the Gigabit Ethernet available on the ODROID-C1+, the network performance of C1+ is an impressive six to nine times faster than Raspberry Pi.

As one can see from the testing results, the quad-core 1.5GHz ODROID-C1 can easily outperform the Raspberry Pi 2 board. Many test results show about 140% more performance from the ODROID-C1+ platform. Even though both platforms are Linux-friendly computing devices, the performance to cost ratio is much higher with the ODROID-C1+. If you are considering a tiny computer for general purpose computing, software development, or as a project platform, the ODROID-C1+ will give you a lot more satisfaction and fun with incredible performance for a very low price.

SPECIFICATIONS

Processor	Amlogic S805 SoC ARM® Cortex®-A5 (ARMv7) 1.5GHz Quad Core ARMv7 architecture @28nm wafer
Memory	1Gbyte DDR3 RAM 792Mhz
3D Accelerator	ARM® Mali™-450 MP2 OpenGL ES 2.0 / 1.1
Flash Storage	eMMC Module Socket : eMMC module (option) MicroSD Card Slot : 8 or 16GB MicroSD UHS-1 (option)
USB2.0 Host	High speed standard A type connector x 4 ports
USB2.0 Device/OTG	High speed micro USB connector x 1 port
Ethernet/LAN	10/100/1000Mbps Ethernet with RJ-45 Jack (Auto-MDIX support)
Video Output	HDMI
Audio Output	HDMI
Camera Input	USB 720p(option)
Real Time Clock	On-board RTC function with a backup battery connector
IO Expansion	40pin port (GPIO/UART/SPI/I2C/ADC) 7pin port (I2S)
WiFi	USB IEEE 802.11b/g/n 1T1R WLAN with Antenna (USB module) (option)
Power	5V 2A Power (option)
System Software	Ubuntu 14.04 + OpenGL ES on Kernel 3.10 LTS or latest Android 4.4.x on Kernel 3.10 LTS or latest Full source code is accessible via our Github.
PCB Size	85 x 56 x 18 mm approx. (Weight : 40 gram w/o heat sink, 56 gram with heat sink) PCB Thickness : 1.0mm

*WIFI MODULE 5A : 해당 제품의 KCC인증이 위조된 것으로 국립전파연구원을 통해 통보 받아 제품의 국내 판매를 2020년 12월 4일부터 중단합니다.

https://www.rra.go.kr/ko/notice/newsList_view.do?nb_seq=2886&cpage=1&nb_type=2&searchCon=&searchTxt=&sortOrder=

Compatible Products

Quick View

Power Supply & Battery

RTC Backup Battery

₩3,400

(DISCONTINUED)ODROID-C1+

OBSOLETED

Discontinuation Notice

ODROID-C1+

Compatible Products

연관 상품